Hope Girl Email
After all this time they have subcontracted out the winding of the core to someone who knows what they are doing!!. I haven't really followed this topic but it indicates to me the people involved are unqualified and unprofessional.
Whilst the core is important they are some way off from perfecting this technology, I wish them all the best.. Hopefully someone who understands this tech will step foreward
Back in early 2014 we needed to wind our first core. We tried to do it by hand, but after 4 hours and only 100 turns (need 7000 turns total) we surrendered and made our first call to the nearest toroid winding company, Torelco. A quick response and some questions to our email inquiry, and Matt Peterson said he thought they could do the job (although they weren’t told at the time exactly what we were doing with the wound core).
We stayed 1 night in a hotel and went home with the first fully processed QEG core, including the mica insulation we had stayed up the entire night before assembling. Finding a willing manufacturer for such a device as the QEG core was a miracle, and really the only winding company we could travel to often if need be. When we open-sourced the build manual in April that year, Torelco stepped up to the plate and fulfilled orders for fully processed cores.
Since then, people all over the world have been finding ways to build cores and other parts, even toroidal winders! The innovations are astounding! But we realize not everyone can or wants to cut steel and wind thousands of turns of wire. That’s where Torelco can help with your build. They offer a fully processed core and supplemental kit to complete your QEG generator, and also sell all the parts you need separately. You can choose between an epoxied or non-epoxied core, and all orders are delivered to your workshop for a reasonable shipping rate.
(Please refer to the QEG Build Manual for detailed descriptions and photos of parts listed below.)
The processed core includes:
Generator Core, 12" OD X 6" ID, 15" overall, 3-1/2" stack, 84 lbs.
Spacer Blocks, Aluminum 6061-T6, 1-1/2" X 1-1/2" X 4-1/2"
Mica Tape, VonRoll 77956 Mica Mat, Polyester Resin Bonded 1"
Mica Plates, 2.25" X 4.5" X .030", 'C' shape, prefabricated
Nomex corner insulation, hand cut
Tape, black, 1" reinforced, high-strength
Sleeving, fiberglass w/PVC, for magnet wire
Tubing, Teflon, for #20 HTAIHSD
Tubing, Teflon, for #12 HTAIHSD
Magnet wire, HTAIHSD #20 RD NAT REA - Pulse Shield - Heavy MW-35C, 73, 36
Magnet wire, HTAIHSD #12 RD NAT REA - Pulse Shield - Heavy MW-35C, 73, 36
Tape, white, 1" fiberglass, hi-temp
2X4s, plywood, misc. shipping pallet materials
Core complete. Processed and secured for shipping.
The parts kit includes:
Bonding Compound #648 50 ml
Primer/Activator #7471 4.5 oz.
Bearing Hardware Kit
End Plate Hardware Kit
Shroud Hardware Kit
Pulley AK30 x 7/8
Pulley AK25 x 7/8
DC PM Variable Speed Motor 90/180V Armature
Motor Mounting Hardware Kit
Variac - Staco 1520CT
Terminal Lug T&B L70
Drill Rod, 1/4" [6.35mm]Ø, Type A2, 1-1\8" L
Platform (Base), Laminate, 18" x 36" x 1-1/2"
Core Mounting Shoe, Laminate, 15" x 6-1/2" x 1-1/2"
Core Mounting Shoe Hardware Kit
Exciter Coil Assembly
Torelco and the FTW/QEG project managers have been working closely together now for almost 2 years developing the QEG technology, best practices, accessibility to people, and lowest prices available for this project. We’re there folks!
Read more at the new QEG Online Academy: http://www.energyeff...inding-co..html. Click around and see the many educational materials available there for the do-it-yourself engineer. Happy Building!
23 Green Street
Salem MA 01970